UV resistance polycarbonate pc hollow grid sheets machine making plant
PART 1 INTRODUCTION:
This pp pe pc hollow cross section sheet/plate extrusion line machine consists of single screw extruder, melt-pump, hydraulic filter exchanging unit, hollowsheet die head, vacuum calibrating table, first haul off machine, oven, corona treating unit, cooling table, second haul off machine, trimming and length-settled cutting units and stacker etc.
PART 2 CHRACTERISTICS OF VACUUM CALIBRATOR
1. High quality mould steel or high strength Al-Mg Alloy
2. Special harden treatment and non-sticky coating on the surface.
3. Independently controlled vacuumize device and temperature controlling system.
4. Consist of vacuum sealing edge device.
The technology of hollow sheet die with co-extrusion feed block to get UV+PC+UV, UV+PC hollow sheet can save 30% UV on the surface.
PART 3 APPLICATION
PC hollow sheet is widely used in construction sunroof in buildings/halls/shopping center/stadium/public places of entertainment and public facility; Ring shield of bus station/garages/pergolas/corridors; Noise barriers for highways and urban elevated road
PART 4 MAIN TECHNICAL DATA
|PC Hollow Sheet Extrusion Line Technical Data|
|Extruder model||SJ-120, SJ-65|
|Main motor power||132kw|
| || |
|THIS LINE CONSISTS OF || |
|1. vacuum feeding machine ||1 set|
|2.SJ-120/36 single screw extruder ||1 set |
|3. Hydraulic exchanging units||1 set |
|4. melting pump ||1 set|
|5. SJ-65/30 single screw extruder for UV||1 set |
|6. melting pump ||1 set |
|7. co-extrusion die head ||1 set |
|8. vacuum calibrating moulds||1 set|
|9. cooling frame and edge cutting units ||1 set |
|10. 12 rollers haul off machine ||1 set|
|11. 3000mm length oven ||1 set|
|12. film coating machine ||1 set|
|13. 6 rollers haul off machine||1 set|
|14. cutting machine ||1 set |
|15. sheet stacker ||1 set |
PART 5 DELIVERY, PAYMENT AND OTHERS SERVICES
1. delivery time: 100 days after receiving the deposit
2. payment terms:40% for the prepayment by T/T and 60% for the downpayment by T/T before delivery or irrevocable L/C at sight can be available, too.
3. Guaranteed time: 18 months for the machenical parts and 12 months for the electrical parts.
4. Service: we will send engineers to customers' factory to help them install, test the machine.
5. Contact: Ms Lilly Zhou, : Mob: 0086-15266238607