2100mm width pc sunshine roof panels/sheets processing machinery
PART 1 INTRODUCTION:
This pp pe pc hollow cross section sheet/plate extrusion line machine consists of single screw extruder, melt-pump, hydraulic filter exchanging unit, hollowsheet die head, vacuum calibrating table, first haul off machine, oven, corona treating unit, cooling table, second haul off machine, trimming and length-settled cutting units and stacker etc.
PART 2 CHRACTERISTICS OF VACUUM CALIBRATOR
1. High quality mould steel or high strength Al-Mg Alloy
2. Special harden treatment and non-sticky coating on the surface.
3. Independently controlled vacuumize device and temperature controlling system.
4. Consist of vacuum sealing edge device.
The technology of hollow sheet die with co-extrusion feed block to get UV+PC+UV, UV+PC hollow sheet can save 30% UV on the surface.
PART 3 APPLICATION
PC hollow sheet is widely used in construction sunroof in buildings/halls/shopping center/stadium/public places of entertainment and public facility; Ring shield of bus station/garages/pergolas/corridors; Noise barriers for highways and urban elevated road
PART 4 MAIN TECHNICAL DATA
PC Hollow Sheet Extrusion Line Technical Data |
Extruder model |
SJ-120, SJ-65 |
Sheet width |
2100mm |
Sheet thickness |
4-10mm |
Max capacity |
450kg/h |
Main motor power |
132kw |
|
|
THIS LINE CONSISTS OF |
|
1. vacuum feeding machine |
1 set |
2.SJ-120/36 single screw extruder |
1 set |
3. Hydraulic exchanging units |
1 set |
4. melting pump |
1 set |
5. SJ-65/30 single screw extruder for UV |
1 set |
6. melting pump |
1 set |
7. co-extrusion die head |
1 set |
8. vacuum calibrating moulds |
1 set |
9. cooling frame and edge cutting units |
1 set |
10. 12 rollers haul off machine |
1 set |
11. 3000mm length oven |
1 set |
12. film coating machine |
1 set |
13. 6 rollers haul off machine |
1 set |
14. cutting machine |
1 set |
15. sheet stacker |
1 set |
PART 5 DELIVERY, PAYMENT AND OTHERS SERVICES
1. delivery time: 80 days after receiving the deposit
2. payment terms:30% for the prepayment by T/T and 70% for the downpayment by T/T before delivery or irrevocable L/C at sight can be available, too.
3. Guaranteed time: 18 months for the machenical parts and 12 months for the electrical parts.
4. Service: we will send engineers to customers' factory to help them install, test the machine.
PART 5 COMPANY INFORMATION AND MAIN PRODUCTS:
PART 6 COMPANY CERTIFICATIONS:
PART 7 MACHINE PACKING AND DELIVERY
All the machine parts will be packed in wooden cases or pellets with stretching films on machine body.
PART 8 COMPANY OVERSEA SHOWS
OUR COOPERATED SUPPLIER LIST