EVA TPE TPU automotive interior floor mat sheet making machine, EVA TPE sheet extrusion machine, EVA TPE TPU sheet production line
This is used to produce the TPE TPU/EVA automitive floor mat sheets, which has features of good aging resistance, temperature resistance, weather resistance, processing without vulcannization. Differecent plasticizers can be recycled. In addtional, TPE floor mat are safe and non-toxic, do not contain additives, and dont emit odor at high temperature in summer. TPE floor mat is very wear-resistance and long service life due to its material characteristics.
Sheet specications:
width 1000mm up 1600-1800mm and thickness 1-4-5-8mm , sheet structure: single layer or multi-layer coextrusion
sheet surface patterns: can be different embossing patterns
Sheet raw material type: powder type formulated material, or granules type
Production line structure as follows:
1 |
DTC-1000 screw feeding machine or vacuum loading machine |
1set |
2 |
High effective single screw extruder or parallel twin screw extruder |
1 set |
3 |
Hydraulic filter exchanging unit |
1 set |
| 4 |
Melting gear pump |
|
5 |
T- die head |
1 set |
6 |
3-roller calander |
1 set |
7 |
Cooling frame 6m and edges trimming |
1 set |
8 |
Coronator for EVA sheet |
1 set |
9 |
Haul-off machine |
1 set |
10 |
Guillotine-transverse cutter |
1 set |
| 11 |
Twin position winder |
1 set |
Technical and photos details:
1. single screw extruder
Axial thrust using ZLYJ series of professional single-screw rubber extruder supporting the design of high precision hardened thrust seat belt gear box, front-end configuration of the output shaft thrust bearing to withstand the screw at work, the whole small size, carrying capacity, smooth transmission, low noise, high efficiency;
2 Die-head
the sheet die: hanger die with two throttle design, sheet thickness accurately. Temperature control ± 1 ºC can accurately control the plasticizing process and sheet thickness, flatness. The material effective width 2150mm; product width 2100mm; Thickness 3-8mm, die material: 5CrNiMoV steel, a total of 11 district heating, the use of stainless steel heating rods; Dies hard chrome plated surface.
3. three-roll calender:
Double tube spiral blade circuit so that the roller surface temperature uniformity, L / cooling quickly and without a lot of cooling medium. Roller surface hardening, grinding, hard chrome plating (coating thickness not less than 0.10mm) after mirror polished, hardness HRC62 above, the roller surface runout is less than 0.02mm, the surface temperature error within ± 2 ºC. HTM attached swivel joints and heat resistant pressure hose.
Wheel positioning: using precision screw lift its components, the central wheel fixed to the upper and lower motor Coarse wheel gap, manual fine-tuning can be adjusted independently around. The purpose can be achieved quickly adjust the gap and precision trimming simultaneously. The mechanism of high strength, high precision, the optimized design is to ensure the quality of the finished sheet core components.
4. traction equipment: traction trimming cooling device
5. cutting:
Shears maximum width: 2000mm maximum thickness:. 4mm, shear rate, 20 beats / min.
6. the conveyor belt:
Part3. the wide range of applications:
The production line can produce eva shoes, PE, PP or PVC sheet material such as sheet metal, high calcium carbonate added (up to 50-75); strong ability to adapt equipment, can be processed simultaneously PP, PE, ABS, PS and so on.
Application: car roof, car trunk mat, car mats and so on;
PART 6 COMPANY INFORMATION AND MAIN PRODUCTS:
PART 7 COMPANY CERTIFICATIONS:
PART 7 MACHINE PACKING AND DELIVERY
All the machine parts will be packed in wooden cases or pellets with stretching films on machine body.
PART 8 OUR RELIABLE SUPPLIERS:
PART 9 COMPANY OVERSEA SHOWS AND CONTACT DETAILS:
PART 10 OUR SERVICE TEAM:
PART 11 OTHER KINDS OF PLASTIC SHEETS/PLATES EXTRUSION LINE RECOMMENDATION :
1. PET sheet extrusion machine:
Processing material: PET virgin pellets(APET or PETG) plus flakes; Or 100% flakes
Thicknes range: 0.2-1.5mm
Net sheet width: 650mm-1500mm(or as per cusotmer's requirement)
Layer structure: Signle layer or multi-layer
Capacity: 150-650kg/h
Application: Thermoforming(cup, bowel, etc. ), stationery, printing sheet, packaging, etc.
2. PP/PS sheet extrusion machine:
Processing material: PP/PS virgin pellets plus recycle material;
Thickness range: 0.15-2mm
Net sheet width: 650mm-720mm-1000mm-1300mm-1500mm(or as per customer's requirement)
Layer structure: Single layer or multi-layer
Capacity: 200kg/h-1000kg/h
Application: Thermoforming(cup, bowel, etc. ), stationery, printing sheet, packaging, etc.
3. ABS/HIPS sheet extrusion machine:
Processong material: ABS/HIPS virgin pellets plus recycle material
Thickness range: 1-6mm
Net Sheet width: 1200mm-1600mm-2100mm(or as per customer's requirement)
Layer Structure: Single layer or multi-layer
Capacity: 300-800kg/h
Application: Vacuum forming, thermoforming, refrigerator inner layer, suitcase, etc.
4. ABS/PMMA sheet extrusion machine:
Processing material: ABS/PMMA virgin pellets plus recycle material
Thickness range: 1-8mm
Net sheet width: 1200mm-1600mm-2100mm(or as per customer's requirement)
Layer structure: Single layer or multi-layer
Capacity:300-800kg/h
Application: Vacuum forming, bathtube, etc.
5. PE sheet extrusion machine:
Processing material: HDPE/LDPE/LLDPE virgin pellets plus recycle material
Thickness range: 1-2.5mm, 3-35mm
Net sheet width: 1200mm-1600mm-1800mm-2500mm-3000mm-40000mm-6000mm-8000mm
Layer structure: Single layer or multi-layer
Capacity: 200kg/h-1200kg/h
Application: Packaging, construction, water-proof, water-drainage, Geomembrane film, etc.
6. PC/GPPS/PMMA sheet extrusion machine:
Processing material: PC/GPPS/PMMA virgin pellets plus recycle material
Thickness range: 1-12mm
Net sheet witdh: 600mm-1220mm-2100mm(or as per customer's requirement)
Layer Structure: Single layer or multi-layer
Capacity: 200-600kg/h
Application: Ads., decoration, roofing, etc.
7. PC/PP/PE hollow profile sheet/ sunshine roofing panel machine:
Processing material: PC/PP/PE virgin material plus recycle material
Thickness range: 2mm-4mm-6mm-8mm-10mm-12mm
Net sheet width: 1220mm-2100mm
Layer structure: Single layer or multi-layer
Capacity:200-600kg/h
Application: Ads. Decoration, roofing, packaging, printing, etc.
8. PVC sheet/edge banding sheet/marble sheet machine:
Processing material: PVC power plus other additive
Thickness range: 0.15-1mm; 1-3mm; 3-12mm
Net sheet width: 650mm-2000mm-3000mm( or as per customer's requirements)
Layer structure: Single layer or multi-layer
Capacity: 200kg/h-500kg/h
Application: Thermoforming, stationery, printing, payment card, SIM card, construction, etc.
9. PVC free foam/celuka foam board extrusion line
board width: 1220mm, thickness: 1-10mm, 3-25mm
board application: decoration board, advertising boards, exhibition boards
extruder model: SJ-80/156 conical twin screw extruder
max capacity: 350kg/h
certifications: CE, ISO9001-2008
10. EVA car interior decoration sheet extrusion line
Processing material: EVA and other additives
Thickness range: 1-8mm
Width range: 1000-1800mm
Layer strcuture: single layer
Capacity: 700-800kg/h
Application: automotive sealing strips, sound insulation cushion, sound absorption sheets,
automobile tail box, fenders, car interior and exterior decoration parts etc.
11. PVC+PMMA Glazed roofing tiles/corrugated sheet extrusion machine
Processing material: PVC, PMMA and other additives
Thickness range: 1-8mm
Width range: 720mm, 880mm, 1040mm
Layer structure: A/B, A/B/A, A/B/C
Capacity: 400kg/h
Application: garden-style factory, tourist scenic spots, pavillions, hotels, family building etc.
Audited Supplier 
){kind=link}