Polypropylene Multiwall Hollow Sheet Extrusion Machine
PP Flute Advertisement Sheet Hollow Sheet Extrusion Line
is used to produce the PP Hollow Sheet and PE Hollow Sheet.
The extrusion lines designed by LEADER are suitable for the extrusion of various PP hollow profile sheets, PP hollow corrugated sheets, PP honeycomb sheets, PP building formwork construction boards etc. All these lines adopt high speed, energy-saving, stable screw, and can increase capacity, compared to other similar machines. Specially designed for calibrating device with individual control each unit; specific temperature control device; reduce heat shrinkage; simple operation. Finished sheets produced by such line are featured with smooth surface, beautiful appearance, high impact.
Raw Material:
1. Can be virgin material
2.Can be recycable material, like the PP/PE Film
This Extrusion Line Consists of :
1. Single Screw Extruder
2. Melt-pump+Hydraulic exchanging unit
3. Vacuum Calibarting Table
4. First Haul off Machine
5. Oven
6. Corona treating unit
7.Cooling table
8. Second Haul-off Machine
9. Trimming and length-settled cutting unit
10. Discharging table.
Characteristics of vacuum calibator:
1. High quality mould steel or high strength Al-Mg Alloy
2. Special harden treatment and non-sticky coating on the surface.
3. Indepently controlled vaccumize device and temperature controling system.
4. Consist of vacuum sealing edge device.
Description
|
Single Layer |
Double Layers |
| Extruder Model |
SJ120 |
SJ120, SJ65 |
| Product Width |
1000-2300mm |
1000-2300mm |
| Product Thickness |
2-10mm |
2-10mm |
| Driving Motor |
132KW |
132KW, 45KW |
| Capacity |
180-260kg/h |
200-300kg/h |
PP hollow profile sheet
PP hollow profile sheets, also called PP fluted sheet, PP corrugated sheets, PP hollow cross section board, PP coroplast sheet, which are featured with non-toxic, 100% recycled, light weight, low temperature resistance, waterproof and moisture proof, corrosion resistance, impact resistance, energy absorption, noise blocking effect.
Widely used in architecture for light partitions, building material protection boards, turnover box, packing boxes etc. Instead of cartons for packing, and also can be used for printing and advertising
In addition, PP hollow sheet are colorful, printable, and machinable that are also widely used in stationery, Card supplies, etc.
PP honeycomb sheet
PP honeycomb sheet extrusion machine adopts one step to extrude 3 layers sheets, middle layer is honeycomb type, surface layers are very thin. Widely used for car trunk cover board, luggage clapboard, sidewall decoration board, high strength of packing box etc.
PP formwork construction board:
As customer's requirements, we can design and manufacture single layer and three layers PP formwork boards extrusion machine. The boards produced by our machine have the advantages of high strength, high impact, wear-resistance, long service life and can be recycled, more eco-friendly. Widely used in basement, high-way, rail-way and bridge etc. wet environment
MORE MACHINE PICTURES:
PART 5 COMPANY INFORMATION AND MAIN PRODUCTS:
PART 6 COMPANY CERTIFICATIONS:
PART 7 MACHINE PACKING AND DELIVERY
All the machine parts will be packed in wooden cases or pellets with stretching films on machine body.
PART 8 COMPANY OVERSEA SHOWS
OUR COOPERATED SUPPLIER LIST
PART 10 OTHER KINDS OF PLASTIC SHEETS/PLATES EXTRUSION LINE RECOMMENDATION :
1. PET sheet extrusion machine:
Processing material: PET virgin pellets(APET or PETG) plus flakes; Or 100% flakes
Thicknes range: 0.2-1.5mm
Net sheet width: 650mm-1500mm(or as per cusotmer's requirement)
Layer structure: Signle layer or multi-layer
Capacity: 150-650kg/h
Application: Thermoforming(cup, bowel, etc. ), stationery, printing sheet, packaging, etc.
2. PP/PS sheet extrusion machine:
Processing material: PP/PS virgin pellets plus recycle material;
Thickness range: 0.15-2mm
Net sheet width: 650mm-720mm-1000mm-1300mm-1500mm(or as per customer's requirement)
Layer structure: Single layer or multi-layer
Capacity: 200kg/h-1000kg/h
Application: Thermoforming(cup, bowel, etc. ), stationery, printing sheet, packaging, etc.
3. ABS/HIPS sheet extrusion machine:
Processong material: ABS/HIPS virgin pellets plus recycle material
Thickness range: 1-6mm
Net Sheet width: 1200mm-1600mm-2100mm(or as per customer's requirement)
Layer Structure: Single layer or multi-layer
Capacity: 300-800kg/h
Application: Vacuum forming, thermoforming, refrigerator inner layer, suitcase, etc.
4. ABS/PMMA sheet extrusion machine:
Processing material: ABS/PMMA virgin pellets plus recycle material
Thickness range: 1-8mm
Net sheet width: 1200mm-1600mm-2100mm(or as per customer's requirement)
Layer structure: Single layer or multi-layer
Capacity:300-800kg/h
Application: Vacuum forming, bathtube, etc.
5. PE sheet extrusion machine:
Processing material: HDPE/LDPE/LLDPE virgin pellets plus recycle material
Thickness range: 1-2.5mm, 3-35mm
Net sheet width: 1200mm-1600mm-1800mm-2500mm-3000mm-40000mm-6000mm-8000mm
Layer structure: Single layer or multi-layer
Capacity: 200kg/h-1200kg/h
Application: Packaging, construction, water-proof, water-drainage, Geomembrane film, etc.
6. PC/GPPS/PMMA sheet extrusion machine:
Processing material: PC/GPPS/PMMA virgin pellets plus recycle material
Thickness range: 1-12mm
Net sheet witdh: 600mm-1220mm-2100mm(or as per customer's requirement)
Layer Structure: Single layer or multi-layer
Capacity: 200-600kg/h
Application: Ads., decoration, roofing, etc.
7. PC/PP/PE hollow profile sheet/ sunshine roofing panel machine:
Processing material: PC/PP/PE virgin material plus recycle material
Thickness range: 2mm-4mm-6mm-8mm-10mm-12mm
Net sheet width: 1220mm-2100mm
Layer structure: Single layer or multi-layer
Capacity:200-600kg/h
Application: Ads. Decoration, roofing, packaging, printing, etc.
8. PVC sheet/edge banding sheet/marble sheet machine:
Processing material: PVC power plus other additive
Thickness range: 0.15-1mm; 1-3mm; 3-12mm
Net sheet width: 650mm-2000mm-3000mm( or as per customer's requirements)
Layer structure: Single layer or multi-layer
Capacity: 200kg/h-500kg/h
Application: Thermoforming, stationery, printing, payment card, SIM card, construction, etc.
9. PVC free foam/celuka foam board extrusion line
board width: 1220mm, thickness: 1-10mm, 3-25mm
board application: decoration board, advertising boards, exhibition boards
extruder model: SJ-80/156 conical twin screw extruder
max capacity: 350kg/h
certifications: CE, ISO9001-2008
10. EVA car interior decoration sheet extrusion line
Processing material: EVA and other additives
Thickness range: 1-8mm
Width range: 1000-1800mm
Layer strcuture: single layer
Capacity: 700-800kg/h
Application: automotive sealing strips, sound insulation cushion, sound absorption sheets,
automobile tail box, fenders, car interior and exterior decoration parts etc.
11. PVC+PMMA Glazed roofing tiles/corrugated sheet extrusion machine
Processing material: PVC, PMMA and other additives
Thickness range: 1-8mm
Width range: 720mm, 880mm, 1040mm
Layer structure: A/B, A/B/A, A/B/C
Capacity: 400kg/h
Application: garden-style factory, tourist scenic spots, pavillions, hotels, family building etc.
CONTACT INFORMATION:
For more detailed information, Please contact with me freely.
Audited Supplier 
){kind=link}