PC Multiwall Hollow Sheet Extrusion line
This line adopts high speed, energy-saving, stable screw, and can increase capacity by more than 25%, compared to other similar machines. Specially designed for calibrating device with individual control each unit; specific temperature control device; reduce heat shrinkage; simple operation. Finished sheets produced by such line is featured with smooth surface, beautiful appearance, high impact, widely used on construction, roofing, glazing etc.
PC Hollow sheet is widely used as sun proof ceilings of office building,hallmarket stadium,recreation center and public facilities; weather shed of bus stationsummer houseand corridor of lounge hall;Safe sun-proof ceilings ofairport and factoriesvelarium of modernized agriculturelivestock breeding industry andindoor swimming pools; noise barrier on high way and elevated road in citiesadvertisement billboardlighting box and exhibition decoration; partition wall between office and living roomand between bathroom and toilet.
Main Technical Parameters:
1. Extruder
Specially designed extruder screw and advanced temperature control system retain the plastic properties of the polycarbonate resin while ensuring extrusion efficiency. High energy efficiency is a major benefit of this PC sheet extruder. The extruder motor consumes 20% less power than an equivalent motor made by our competitors.
2. Extrusion Die
High quality alloy extrusion die lip and choker bar provides uniform pressure drop from die inlet to die lip. Precisely machined die assures good quality of finished extruded sheet.
3. Vacuum Calibration Table
The thermal convection system of the calibration table features an intersection arrangement which ensures the hot PC resin flow is effectively cooled and the final extrudate achieves the desired shape and accurate dimensions. As far as the shape forming process is concerned, our multiwall sheet extrusion machinery allows rapid shape formation through sizing and cooling without the need of cold water. It helps save energy and improves efficiency.
4. Dry Vacuum Calibrator
The vacuum calibrator consists of 2 independent sub-systems, which are equipped with many close-loop vacuum channels.
5. Electrical Control System
Programmable logic control ensures precise extrusion process parameters and optimized operation features.
Part 1 Introduction:
This polycarbonate hollow sheet extrusion line realizes continuous production of PC hollow grid sheet, which is applicable to construction decoration, advertisement collocation, and noise insulation of highway as well as packaging. It is characterized by light weight, high intensity,high transparency dampproof, and anticorrosion.
The technology of hollow sheet die with co-extrusion feed block to get UV+PC+UV, UV+PC hollow sheet can save 30% UV on the surface.
Part 2: Sheet Spcifications:
Sheet width: 700mm-1050mm- 1220mm-2100mm-2300mm,
Sheet thickness is 4mm-6mm-8mm-10mm-12mm.
Sheet walls: double walls
Mian technical parameters
|
Item
|
width range
|
Thickness range
|
|
PC Hollow grid sheet
|
1220/2100mm
|
3-25mm
|
|
PC Hollow U-locked sheet
|
600/900/1200mm
|
4-16mm
|
|
PC Hollow lapping /splice sheet
|
1000mm
|
20-40mm
|
|
PC Hollow greca /wave sheet
|
900/1000mm
|
3-6mm
|
COMPANY INFORMATION AND CERTIFICATIONS:
DELIVERY AND PACKAGING:
OVERSEA TRADE SHOWS:
CONTACT DETAILS:
PART 5 OTHER KINDS OF PLASTIC SHEET EXTRUSION MACHNE RECOMMANDATION:
1. PET sheet extrusion machine:
Processing material: PET virgin pellets(APET or PETG) plus flakes; Or 100% flakes
Thicknes range: 0.15-1.5mm
Net sheet width: 650mm-1500mm(or as per cusotmer's requirement)
Layer structure: Signle layer or multi-layer
Capacity: 350-650kg/h
Application: Thermoforming(cup, bowel, etc. ), stationery, printing sheet, packaging, etc.
2. PP/PS sheet extrusion machine:
Processing material: PP/PS virgin pellets plus recycle material;
Thickness range: 0.15-2mm
Net sheet width: 650mm-720mm-1000mm-1300mm-1500mm(or as per customer's requirement)
Layer structure: Single layer or multi-layer
Capacity: 200kg/h-1000kg/h
Application: Thermoforming(cup, bowel, etc. ), stationery, printing sheet, packaging, etc.
3. ABS/HIPS sheet extrusion machine:
Processong material: ABS/HIPS virgin pellets plus recycle material
Thickness range: 1-6mm
Net Sheet width: 1200mm-1600mm-2100mm(or as per customer's requirement)
Layer Structure: Single layer or multi-layer
Capacity: 600-800kg/h
Application: Vacuum forming, thermoforming, refrigerator inner layer, suitcase, etc.
4. ABS/PMMA sheet extrusion machine:
Processing material: ABS/PMMA virgin pellets plus recycle material
Thickness range: 1-8mm
Net sheet width: 1200mm-1600mm-2100mm(or as per customer's requirement)
Layer structure: Single layer or multi-layer
Capacity: 600-800kg/h
Application: Vacuum forming, bathtube, etc.
5. PE sheet extrusion machine:
Processing material: HDPE/LDPE/LLDPE virgin pellets plus recycle material
Thickness range: 1-2.5mm, 3-35mm
Net sheet width: 1200mm-1600mm-1800mm-2500mm-3000mm-40000mm-6000mm-8000mm
Layer structure: Single layer or multi-layer
Capacity: 500kg/h-1200kg/h
Application: Packaging, construction, water-proof, water-drainage, Geomembrane film, etc.
6. PC/GPPS/PMMA sheet extrusion machine:
Processing material: PC/GPPS/PMMA virgin pellets plus recycle material
Thickness range: 1-12mm
Net sheet witdh: 600mm-1220mm-2100mm(or as per customer's requirement)
Layer Structure: Single layer or multi-layer
Capacity: 400-600kg/h
Application: Ads., decoration, roofing, etc.
7. PC/PP/PE hollow profile sheet/ sunshine roofing panel machine:
Processing material: PC/PP/PE virgin material plus recycle material
Thickness range: 2mm-4mm-6mm-8mm-10mm-12mm
Net sheet width: 1220mm-2100mm
Layer structure: Single layer or multi-layer
Capacity: 400-600kg/h
Application: Ads. Decoration, roofing, packaging, printing, etc.
8. PVC sheet/edge banding sheet/marble sheet machine:
Processing material: PVC power plus other additive
Thickness range: 0.15-1mm; 1-3mm; 3-12mm
Net sheet width: 650mm-2000mm-3000mm( or as per customer's requirements)
Layer structure: Single layer or multi-layer
Capacity: 300kg/h-500kg/h
Application: Thermoforming, stationery, printing, payment card, SIM card, construction, etc.
9. EVA car interior decoration sheet extrusion line
Processing material: EVA and other additives
Thickness range: 1-8mm
Width range: 1000-1800mm
Layer strcuture: single layer
Capacity: 700-800kg/h
Application: automotive sealing strips, sound insulation cushion, sound absorption sheets,
automobile tail box, fenders, car interior and exterior decoration parts etc.
Welcome your inquiry. Please contact with me freely. I am sure you will get quick and Warmly response.
1. Please kindly inform me specification of the products you want to produce:
If you want plastic pipe, plz Inform us pipe diameter & thickness (SDR)
If you want plastic sheet, plz inform us sheet width & thickness.
If you want plastic profile, plz send us general size, picture or drawings.
2. We will send you the quotation details according to your requirements.
Our Services
1. Warranty for machinery: 18months for mechanical parts, 12 months for electrical parts.-Long Time warranty
2. Technical service and support will be forever.-Best service
3. We will dispatch four 1-2 engineers from the seller to the buyer's factory for installation and commissioning and training till the buyer's workers can operate the machines independently.- On-site service
About Us
1. Reliable quality with ISO9001:2008 CE GOST SGS certification. We use the famous parts and material. Main electrical parts:
ABB,Omron, Schneider,RKC,Siemens. China famous brand Screw, Barrel, T-die, Mould. Such as JC-times mould, JINXING Brand Screw,Made in Zhejiang Zhoushan.
2. Global sight and keep up the trend of new technology. We have our own R&D team, and we attend famous and professional Exhibition to realize the variety demands of global customers and learn the New development of The plastic extrusion machine. Such as NPE, K show in Germany, Exhibition of Italy,Turkey, Korea, Russia,Poland, Chinaplas etc.
3. Excellent service:We have been engaged in exporting since foundation , Warranty for machinery 18months for mechanical parts, 12 months for electrical parts and technical service will be forever.
4. Praise from Customer. Our machines are well recognized by customers after years of good performance of work. They purchased our machine one by one.
Audited Supplier 
){kind=link}