UV resistance polycarbonate pc hollow grid sheets extrusion line
PART 1 INTRODUCTION:
This pp pe pc hollow cross section sheet/plate extrusion line machine consists of single screw extruder, melt-pump, hydraulic filter exchanging unit, hollowsheet die head, vacuum calibrating table, first haul off machine, oven, corona treating unit, cooling table, second haul off machine, trimming and length-settled cutting units and stacker etc.
PART 2 CHRACTERISTICS OF VACUUM CALIBRATOR
1. High quality mould steel or high strength Al-Mg Alloy
2. Special harden treatment and non-sticky coating on the surface.
3. Independently controlled vacuumize device and temperature controlling system.
4. Consist of vacuum sealing edge device.
The technology of hollow sheet die with co-extrusion feed block to get UV+PC+UV, UV+PC hollow sheet can save 30% UV on the surface.
PART 3 APPLICATION
PC hollow sheet is widely used in construction sunroof in buildings/halls/shopping center/stadium/public places of entertainment and public facility; Ring shield of bus station/garages/pergolas/corridors; Noise barriers for highways and urban elevated road
PART 4 MAIN TECHNICAL DATA
1. sheet width: 2100mm, thickness 4-6-8-10mm
2. sheet application: roofing panels,
3. extruder model: SJ-120/35+45/30
4. max capacity: 300-350kg/h
5. installed power: 520kw
6. certifications: CE, ISO9001-2008
7. Transportation: 3 sets of 40GP containers
8. Machine dimension: 42m*5.5m*3.5m
|1||SJ120/35 Single screw extruder with stainless steel hopper||1 set|
|2||Screen exchanging unit for PC||1 set|
|3||Melting gear pump for PC||1 set|
|4||SJ45/30 Single screw extruder for UV layer||1 set|
|5||Melting gear pump for uv||1 set|
|6||T-type Die head (2100mm*4-6mm)||1 set|
|7||Vacuum calibrating board||1 set|
|8||cooling table||1 set|
|9||The first haul off machine with 12 rollers||1 set|
|10||edge cutting device|
|11||5000mm oven||1 set|
|12||Corona treating unit||1 set|
|13||up and down sides, double position film laminating device ||1 set|
|14||The second haul off machine||1 set|
|15||Tranverse cutting machine (length-settled)||1 set|
|16||material conveyor+6000mm discharge table||1 set|
|17||eletrical cabinet||1 set|
| ||other accessory machine parts |
|18||500kg mixing and drying machine ||1 set |
|19||AC-25 water chiller ||1 set |
|20||15kw air compressor ||1 set |
|21||sheet crusher ||1 set |
PART 5 DELIVERY, PAYMENT AND OTHERS SERVICES
1. delivery time: 100 days after receiving the deposit
2. payment terms:50% for the prepayment by T/T and 50% for the downpayment by T/T before delivery or irrevocable L/C at sight can be available, too.
3. Guaranteed time: 18 months for the machenical parts and 12 months for the electrical parts.
4. Service: we will send 1-2 engineers to customers' factory to help them install, test the machine and also train their workers, but customers should bear the round tickets, accommodation, and salary etc.
5. Contact: Ms Lilly Zhou,: 0086-15266238607